Professional Gummy Bear Recipes

HOMEMADE GUMMY BEARS

Steps:

• Combine the fruit juice or lemonade, gelatin and sugar in a small saucepan. Cook over low heat, stirring often, until the gelatin and sugar dissolve completely, about 1 minute (make sure there is no undissolved sugar stuck to the bottom of the saucepan). If any foam forms while stirring, skim it off and discard. Transfer the mixture to a small liquid measuring cup.
• Put the gummy bear molds on a flat surface and slowly fill each cup to the top. Give each mold a small shake to ensure the mixture settles to the bottom. Refrigerate until the mixture sets, about 10 minutes. Store at room temperature in an airtight container for up to 5 days.

GUMMY BEAR RECIPE

Steps:

• Combine gelatin, and water (or flavored liquid) in a heatproof container. Stir gently to combine. Let sit for 5 minutes to give your gelatin time to bloom.
• Combine together the corn syrup, sugar, and sorbitol in a medium saucepan. Stir gently to combine. Bring to a simmer over medium-high heat.
• Once simmering, wash down the sides of the pan with water using a clean pastry brush to make sure any stray grains of sugar is dissolved fully.
• Remove the mixture from the heat and stir in your citric acid and gelatin mixture with a spatula until gelatin is melted.
• Let the mixture sit for 10 minutes and allow the mixture to clear and foam to collect at the top. After 10 minutes the foam should be able to be easily scooped off the surface with a spoon.
• Divide your mixture by straining the liquid into three bowls and add in any coloring or candy flavorings that you want. I used pink, blue and yellow food coloring.
• Spray your molds lightly with some oil and wipe out the excess. Pour your mixture into your molds.
• Let your gummy bears chill in the fridge for 6 hours until the bears are set but 24 hours is best. Once they are set they can be stored at room temperature.

HOMEMADE GUMMY BEARS

Steps:

• Gather the ingredients.
• Spray a paper towel with nonstick cooking spray , then rub it lightly around the bear cavities in the mold to coat them with a thin layer of oil.
• In a small bowl, combine both gelatins and the cold water.
• Whisk them together, then let them sit at room temperature for 10 minutes to allow the gelatin to soak up the water and soften.
• Place the bowl in the microwave and cook for 30 seconds, then whisk well. Microwave for another 30 seconds and stir. The sugar should be dissolved and the mixture well mixed. If not, microwave for another 10 to 15 seconds until the sugar and gelatin are completely dissolved. Pour it into a measuring cup with a spout.
• Pour the gelatin into the cavities. Alternatively, you can use a food-grade dropper to drop the mixture more precisely into the molds.
• Place the candy mold in the refrigerator for about 20 minutes to set the gelatin.
• To remove the bears, carefully push the sides away from the edges and toward the center, then pull them up and out of the molds. Repeat with other colors and flavors of gelatin, as desired.
• Serve and enjoy.

GUMMY BEARS

Steps:

• Mix all ingredients in a saucepan until the mixture resembles playdough.
• Place the pan over low heat and stir until melted.
• Once completely melted, pour into plastic candy molds and place in freezer for 5 min.
• When very firm, remove from molds.