Pressure Cooker Ribs Recipes

PRESSURE-COOKER PORK RIBS

Steps:

• Sprinkle ribs with onion salt, pepper and paprika. Select saute setting on a 3- or 6-qt. electric pressure cooker. Adjust for medium heat; add oil. When oil is hot, brown meat on all sides; remove from pressure cooker. Add water to pressure cooker. Cook 30 seconds, stirring to loosen browned bits from pan. Press cancel. Whisk in remaining ingredients. Return ribs to pressure cooker., Lock lid; close pressure-release valve. Adjust to pressure-cook on high for 20 minutes. Let pressure release naturally. If desired, skim fat and thicken cooking juices.

BEST PRESSURE COOKER STICKY BBQ RIBS EVER

Steps:

• Pour apple cider into an 8-quart multi-functional electric pressure cooker (such as Instant Pot®) to about 1/2 inch below the rack line. Stir in garlic powder, salt, paprika, and pepper. Place rack inside and heat the liquid completely; place ribs on rack.
• Close and lock the lid. Select high pressure according to manufacturer's instructions; set timer for 27 minutes. Allow 10 to 15 minutes for pressure to build.
• Preheat the oven to 350 degrees F (175 degrees C). Line a baking pan with a roasting rack.
• Pour about 2 cups BBQ sauce into a large cup. Add garlic, brown sugar, and chili sauce. Mix with a hand blender until completely smooth. Combine with the remaining BBQ sauce in a large bowl. Set aside to come to room temperature.
• Release pressure carefully using the quick-release method according to manufacturer's instructions, about 5 minutes.
• Remove ribs carefully and drain cooking liquid. Fully submerge each rib into the BBQ sauce. Place on the roasting rack so they are not touching. Brush extra BBQ sauce on top to make them extra sticky.
• Bake in the preheated oven until sauce is set, 15 to 20 minutes.

ELECTRIC PRESSURE COOKER PORK RIBS

Steps:

• Combine dry seasonings. Remove and discard membranes from rib halves. (See tip.) Rub seasoning mixture onto both sides of rib halves.
• Add water to electric pressure cooker. Place trivet in pressure cooker; top with rib halves. Close and lock lid. Turn Pressure Release Valve to Sealing position.
• Cook 30 min. using HIGH PRESSURE COOK setting. When timer goes off, use Natural Pressure Release for 10 min., then do a Quick Pressure Release to release any remaining pressure. Meanwhile, heat oven to 450°F. Cover rimmed baking sheet with foil; spray with cooking spray.
• Turn off pressure cooker. Slowly remove lid. Transfer ribs to prepared baking sheet. Brush barbecue sauce onto both sides of rib halves.
• Bake 10 to 15 min. or until sauce is hot and bubbly.

PRESSURE COOKER RIBS

Steps:

• Prepare Baby Back Ribs: Remove the membrane from the back of the ribs with a butter knife and a paper towel.
• Dry Rub Baby Back Ribs: Mix all the dry rub ingredients and rub it all over the baby back ribs. Then, set aside while you prepare other ingredients.
• Pressure Cook Baby Back Ribs: Pour the homemade BBQ sauce into the pressure cooker. Add 2 - 3 drops of liquid smoke into the BBQ sauce. Place the baby back ribs into the BBQ sauce (see tips). *Pro Tip: If your Instant Pot is very sensitive to the "Burn Error", layer the Ketchup & Dijon mustard on top of the Ribs instead of mixing it into the BBQ sauce.Close lid and Pressure Cook at High Pressure for 16 - 25 minutes. Turn off the heat and Full Natural Release. Open the lid carefully.*Pro Tip: Adjust your cooking time according to your preference: 16 minutes (tender with a bit of chew) to 25 minutes (fall off the bone).
• Preheat Oven: While the baby back ribs is cooking in the pressure cooker, preheat the oven to 450°F.
• Set Aside Baby Back Ribs: Carefully place the pressure cooked baby back ribs on a chopping board with kitchen tongs. Cover it with aluminum foil and set aside.
• Filter the Fat (Optional Step): Filter the BBQ sauce with a strainer and remove the fat with an oil separator.
• Reduce BBQ sauce: Place roughly chopped carrots into the BBQ sauce and bring your BBQ sauce to a simmer (Instant Pot: Press Sauté button once, then Adjust button to Saute Less Function).Continue to reduce and thicken the BBQ sauce by simmering until desired thickness (~6 - 8 mins). Occasionally, stir with a wooden spoon. Taste the seasoning of the BBQ sauce. Stir in more brown sugar and additional 1 - 2 drops of liquid smoke if necessary.
• Apply Sauce and Finish in Oven or Grill: Brush the homemade BBQ sauce all over the baby back ribs on all sides including the bones with a silicone basting brush. Place the baby back ribs in the oven on the top rack for 10 - 15 minutes.
• Serve and Enjoy: Serve the baby back ribs immediately with more homemade BBQ sauce along with the carrots.

PRESSURE COOKER BABY BACK RIBS RECIPE

Steps:

• Add all listed dry rub ingredients to a small bowl. Stir to combine. Set aside, or store in an airtight container on your spice rack for up to 1 month.
• There will be a thin membrane on the back of the ribs ("silverskin") that needs to be removed - otherwise the dry rub won't penetrate the meat all around the ribs & your ribs will be difficult to chew! I find it's easiest to use a butter knife (something with a blunt edge that is not sharp) to work the silverskin off the ribs in 1 spot. From there, slide your finger under the membrane & the silverskin should pull off very easily. Reference the photos provided in the blog post above if you need a visual. I also found this simple video tutorial to be very helpful!
• Generously season the ribs all over with kosher salt, then sprinkle the dry rub all over the ribs, using your hands to lightly work the rub into the meat.
• Add the water & liquid smoke mixture to the bowl of your electric pressure cooker. Fit the bowl with its trivet/rack. Place the prepared rack of ribs on the trivet/rack, bending as needed to fit into the bowl. Cover the pressure cooker, securely locking its lid into place & ensuring the vent is turned to its "sealing" position. Cook on low pressure for 30 minutes. Once the timer goes off, allow the pressure to release naturally for about 10 minutes (literally just leave the pot for 10 minutes!) before carefully flicking the vent to its "venting" position to allow any residual pressure to release. The ribs will hold to the bone but will have a great fall-apart tender texture - perfect! Carefully transfer the ribs to a baking sheet or serving platter.
• Optional: Grill the ribs: While the pressure cooker releases, preheat the grill to medium-high (approx. 600 degrees F). Grill the ribs over direct heat for 3-4 minutes per side, brushing them with your favorite BBQ sauce the whole time. You don't need to grill them very long, just enough to get some nice grill marks & smoky char.
• the ribs with your favorite BBQ sauce & BBQ sides. In our house, that's cornbread, potato salad & coleslaw - YUM. Enjoy!

PRESSURE-COOKER SHORT RIBS

Steps:

• Sprinkle ribs with salt and pepper. Select saute setting on a 6-qt. electric pressure cooker and adjust for medium heat. Add oil. Working in batches, brown ribs on all sides; transfer to a plate and keep warm., Add onions to cooker; cook and stir until tender, 8-9 minutes. Add garlic and tomato paste; cook and stir 1 minute more. Stir in beef broth, wine, thyme and bay leaf. Bring to a boil; cook 8-10 minutes or until liquid is reduced by half. Add ribs back to cooker, partially but not fully submerging them. Lock lid; close the pressure-release valve. Adjust to pressure-cook on high for 40 minutes. Quick-release pressure. Add carrots; bring back to full pressure and cook 7 minutes. Quick-release pressure. Press cancel., Remove ribs and vegetables; keep warm. Skim fat from cooking liquid. Discard thyme and bay leaf. Select saute setting and adjust for medium heat; bring cooking juices to a boil. In a small bowl, mix cornstarch and water until smooth; stir into juices. Return to a boil; cook and stir until thickened, 1-2 minutes. Serve with ribs and vegetables.

INSTANT POT RIBS

Steps:

• Remove membranes from the back of ribs, if needed.
• Rubs seasonings over both sides of ribs.
• Place wire trivet rack in the bottom of the instant pot.
• Add water, apple juice (or apple cider vinegar) and liquid smoke (optional, but recommended for that great smokey flavor).
• Place the ribs upright, with the meat side facing out. If you're using one large rack of ribs, then circle them around the pot.
• Secure lid and close vent.
• Press "manual" or "pressure cook" and cook on high pressure for 25 minutes.
• When the timer beeps, allow the pressure to naturally release for 15 min, then turn the valve to quick release.
• Carefully remove ribs to a large, foil-lined baking sheet and slather them in BBQ sauce.
• Optional: broil them in the oven for 2-3 minutes to caramelize the bbq sauce.

FAST PRESSURE COOKER RIBS

Steps:

• Season ribs with garlic powder, salt, and pepper.
• Place a layer of onion in the bottom of a pressure cooker. Add a layer of ribs. Repeat with remaining onion and ribs.
• Combine barbeque sauce and broth together in a bowl; pour over ribs in the pressure cooker.
• Close cooker securely and place pressure regulator over vent according to manufacturer's instructions. Heat until steam escapes in a steady flow and makes a whistling sound, about 5 minutes. Adjust heat until regulator is gently rocking. Cook for 25 minutes. Transfer the pressure cooker to the sink; cool the pot with cold water for about 30 seconds to release pressure quickly.