Easy Competition Quality Babyback Ribs Recipes

SLOW & EASY BABY BACK RIBS

Steps:

• Place ribs in a 5-qt. slow cooker. In a small bowl, combine the onion, ketchup, brown sugar, vinegar, tomato paste, paprika, Worcestershire, mustard, salt and pepper; pour over ribs. Cover and cook on low for 5-6 hours or until meat is tender., Remove ribs to a serving platter; keep warm. Skim fat from cooking juices; transfer juices to a small saucepan. Bring to a boil., Combine cornstarch and water until smooth. Gradually stir into the pan. Bring to a boil; cook and stir for 2 minutes or until thickened. Serve with ribs.

BABY BACK RIBS

Steps:

• Preheat oven to 350 degrees F.
• Cut the racks of ribs in half crosswise. Rub the ribs, paying special attention to the meaty side, with 1/2 cup of the sauce. Lay the rib pieces meat side down in an 11 by 13-inch baking dish. The pieces will overlap slightly.
• Cover the dish tightly with aluminum foil and bake until the meat begins to pull away from the ends of the bones and the ribs are just tender, about 1 hour. You can bake the ribs up to a day before and keep them refrigerated. Bring refrigerated ribs to room temperature about 1 hour before you grill them.
• Preheat an outdoor grill to medium-high heat. Grill the ribs, brushing them with about half the remaining sauce, until they're crispy and heated through, about 10 minutes. Move the ribs around as they grill, the sugar in barbecue sauce makes it easy for them to burn. Let the ribs rest for 5 to 10 minutes before cutting them into 1 or 2-bone pieces. Put out the rest of the sauce for dipping or brush it over the ribs.
• Stir all ingredients together in a small bowl until sugar is dissolved. The sauce will keep in the refrigerator for up to 2 weeks.

BABY BACK RIBS

Steps:

• Tear off 4 pieces of aluminum foil big enough to enclose each portion of ribs. Spray each piece of foil with vegetable cooking spray. Brush the ribs liberally with barbeque sauce and place each portion in its own piece of foil. Wrap tightly and refrigerate for at least 8 hours, or overnight.
• Preheat oven to 300 degrees F (150 degrees C).
• Bake ribs wrapped tightly in the foil at 300 degrees F (150 degrees C) for 2 1/2 hours. Remove from foil and add more sauce, if desired.

EASY OVEN BAKED RIBS

Steps:

• Pre-heat oven to 250* F.
• Season all sides of the ribs with your favorite rub.
• Using a 13x9x2 baking dish (or most likely a larger 15x11x2), place the ribs into the pan, do not over crowd. If using Baby Back slabs, place bone side facing up. If using individual Country Style (St. Louis), lay on their side.
• Cover the baking dish with foil and place on center rack of pre-heated oven. Bake for approximately 2 1/2 - 3 hours (depending on the size of the ribs you are using).
• Remove the ribs from oven and drain any grease from dish; reserving the foil for later use (waste not, want not). Flip the ribs over (meaty side up) and slather with your favorite BBQ sauce and return the dish to the oven (un-covered) for an additional 30 minutes.
• Once done, remove the ribs to a platter, loosely tent the platter with the reserved foil, and allow to rest for 10 minutes. (This step is important -- the resting period gives the ribs time to re-distribute their juices, just like a steak would).
• Enjoy!

SMOKED RIB RUB RECIPE

Steps:

• Mix your dry spices together in a small bowl or other container.
• If it hasn't been done already, flip your ribs over and make a small cut into the white membrane cover the back closest to one of the ends.
• Using a paper towel to help grip, slowly and gently pull the membrane down until it separates from the ribs, using a knife to clean up any scraps.
• Liberally coat both sides of your ribs in spices, rubbing into the meat to ensure everything is covered.
• Wrap the rack in plastic wrap and place on a large baking tray in the refrigerator over night and up to a full 24 hours to let the flavors develop.
• Half an hour before cook time, take your ribs from the fridge and let them start to warm up at room temperature.
• This helps them to cook more evenly while they're smoking as the inside and outside will be roughly even in temperature, avoiding overcooking the outside with a raw inside.
• Additionally, soak your wood chips in hot water at this time if you're using them instead of chunks.
• Fill your smoker halfway with charcoal and light it.
• Close the lid and allow it to start heating up.
• If you're using a thermometer, it should read around 225 degrees Fahrenheit.
• When your charcoal has burnt down and your smoker is up to temperature, add more charcoal, toss on your wood, add the grate, fill the water tank, and close the lid once again.
• This gives the wood a chance to start smoking and the new material a chance to burn.
• After another ten minutes or so, you're finally ready to cook.
• Place your ribs meat side up into the center of your smoker and close the lid.
• Depending on the type of rib you use, it'll most likely take around four hours to cook fully (baby backs run shorter, St. Louis run longer).
• You can check this by sight if the meat has begun to pull away from the bones or by temperature when a rib measures 195 degrees Fahrenheit internally.
• As your ribs smoke, make sure to monitor the levels of wood, charcoal, and water in your smoker and add more of each as needed.
• Additionally, keep the temperature consistent by adjusting the air vents, especially when introducing new fuel to the fire.
• Every half hour, spray your ribs down with apple juice or apple cider from a spray bottle.
• This both flavors the meat and helps keep the outside moist during the long cooking process.
• In the last half hour of cooking, paint on a thick layer of barbecue sauce across the meat and allow it to caramelize on the outside, though be careful not to burn it.
• If it appears to be burning, remove the ribs from the heat or tent them in aluminum foil until they're fully cooked.
• After removing your ribs from the smoker, allow them to rest half an hour at minimum while wrapped loosely in aluminum foil.
• This gives the meat a chance to relax after being cooked and lets the juices redistribute throughout, making for a more tender, flavorful, and juicy rib.
• Use this time strategically to finish any side dishes or meal prep you hadn't to gotten yet.
• Once the ribs have rested, it's time to eat.

MEATHEAD'S LAST MEAL RIBS RECIPE

Steps:

• Prep. Rinse the ribs in cool water to remove any bone bits from the butchering.
• If the butcher has not removed the membrane from the under side, do it yourself. It gets leathery and hard to chew, it keeps fat in, and it keeps sauce out. To remove it, insert a butter knife under the membrane, then your fingers, work a section loose, grip it with a paper towel, and peel it off. If you can't get the skin off, with a sharp knife, cut slashes through it every inch so some of the fat will render out during the cooking. Click here to see more photos of how to skin 'n' trim ribs and here's a quickie 1 minute video of the technique.
• Trim the excess fat from both sides of the rack of ribs.
• Next it is time to add the salt. The rule of thumb is 1/2 teaspoon of kosher salt per pound of meat, but ribs are about 50% bone, so use about 1/4 teaspoon per pound. You can simply eyeball it by sprinkling on the same amount of salt you would sprinkle on the ribs if they were served to you unsalted. If you can, give the salt 1 to 2 hours to be absorbed. The process of salting in advance is called dry brining.
• Before adding a BBQ rub, be aware of double salt jeopardy! Rubs and spice blends are a great way to add flavor to meat, but almost all commercial rubs contain salt so be careful not to pre-salt the ribs if you plan on using one of these rubs otherwise they will be unbearably salty. Also note that some ribs sold in grocery stores are labeled as "enhanced" or "flavor enhanced" or "self-basting" or "basted," meaning that they have been injected with a brine at the packing plant so if you are using these you probably want to use a rub that doesn't include salt like our Meathead's Memphis Dust recipe.Some folks insist on putting the barbecue rub on the night before, but it isn't necessary. The molecules in spices are too large to penetrate more than a tiny fraction of an inch. Read this for the science.
• Before applying the rub, just coat the meat with a thin layer of water. The water helps dissolve the spices. A lot of cooks like to use mustard under the rub as a form of glue. Mustard is water, vinegar, and maybe white wine (all mostly water) with mustard powder mixed in. The amount of mustard powder is so small that by the time the water steams off and drips away, the mustard powder remaining is miniscule. My experience is that using a mustard slather makes little or no difference in the final outcome. If you want a mustard flavor, you will do much better by simply sprinkling it on the meat. Once wet, sprinkle enough Meathead's Memphis Dust to coat all surfaces but not so much that the meat doesn't show through. That is about 2 tablespoons per side depending on the size of the slab. Spread the Memphis Dust on the meat and rub it in.
• Fire up. Pre-heat your barbecue smoker or set up your grill for 2-zone (indirect) cooking. Adjust the dampers on your cooker to bring the temperature to about 225°F and try to keep it there throughout the cook. Cooking at 225°F will allow the meat to roast low and slow, liquefying the collagen in connective tissues and melting fats without getting the proteins knotted in a bunch. It's a magic temp that creates silky texture, adds moisture, and keeps the meat tender. If you can't hit 225°F, get as close as you can. Don't go under 200°F and try not to go over 250°F.When monitoring the cooker temperature you can absolutely positively noway nohow rely on bi-metal dial thermometers. If you are not monitoring your cooker with a good digital oven thermometer, you are setting yourself up for disappointment. Using a dial thermometer is like trying to send email with a typewriter. Click here to read my buyer's guide to thermometers.Once you have reached the desired temperature, add about 4 ounces of dry wood, placing it as close to the flame as possible.
• Cook. Put the slabs in the cooker in indirect heat, meaty side up, close the lid, go drink a beer, read a book, or make love.
• When the smoke dwindles after 20 to 30 minutes, add another 4 ounces of wood. After that, DO NOT add any more wood. On your first attempt, resist the temptation. Nothing will ruin a meal faster and waste money better than over-smoked meat. You can always add more the next time you cook, but you cannot take it away if you over-smoke.
• If you have more than one slab on, halfway through the cook you will need to move the ribs closest to the fire away from the heat, and the slabs farthest from the flame in closer. Leave the meat side up. There is no need to flip the slabs. You can peek if you must, but don't leave the lid open for long.
• This next step is known as the Texas Crutch. This optional trick involves wrapping the slab in foil with about an ounce of water for up to an hour to speed cooking and tenderize a bit. Almost all barbecue ribs competition cooks use the Texas Crutch to get an edge. But the improvement is really slight and I never bother for backyard cooking. If you crutch too long you can turn the meat to mush and time in foil can soften the bark and remove a lot of rub. I recommend it only for barbecue competitions when the tiniest improvement can mean thousands of dollars. Skip it and you'll still have killer ribs. But if you've seen it on TV and must try it, click here to learn more about The Texas Crutch. The Texas Crutch is it is baked into a popular technique called the 3-2-1 method which I do not recommend. Two hours in foil or butcher paper is far too long and can make the meat mushy. Try the Texas Crutch after you master the basics.
• For cooking time, allow 5 to 7 hours for St. Louis Cut (SLC) Ribs or Spare Ribs, and 3 to 5 hours for Baby Back Ribs. Thicker, meatier slabs take longer. If you use rib holders so they are crammed close to each other, add another hour.
• When it is time to find out whether or not the ribs are ready, we us the bend test (a.k.a. the bounce test). Although we insist that you buy a good digital meat thermometer for most smoking and grilling, this is one of the few meats on which you cannot use a meat thermometer because the bones have an impact on the meat temp and because the meat is so thin. To conduct the bend test, pick up the slab with tongs and bounce it gently. If the surface cracks as in the picture above, it is ready. Here are some other tricks to tell when ribs are ready.
• Once the ribs are done cooking it is time to add the sauce unless you intend to serve them "dry" like they do in Memphis. The key to saucing ribs is to go easy on it so that the meat can shine through. Simply paint both sides of the rack with your favorite home made barbecue sauce or store-bought barbecue sauce and cook for another 15 minutes or so. Don't put the sauce on earlier than that. It has sugar and there is a risk it can burn. Now here's a trick I like: Sizzle on the sauce. Put the ribs with sauce directly over the hottest part of a grill in order to caramelize and crisp the sauce. On a charcoal grill, just move the slab over the coals. On a gas grill, crank up all the burners. On a water smoker, remove the water pan and move the meat close to the coals. On an offset smoker, put a grate over the coals in the firebox and put the meat there. With the lid open so you don't roast the meat from above, sizzle the sauce on one side and then the other. The sauce will actually sizzle and bubble. Stand by your grill and watch because sweet sauce can go from caramelized to carbonized in less than a minute! One coat of a thick sauce should be enough, but if you need two, go ahead, but don't hide all the fabulous flavors under too much sauce. If you think you'll want more sauce, put some in a bowl on the table.
• Serve. Once sauced, slice the rack between the bones. If you've done all this right, you will notice that there is a thin pink layer beneath the surface of the meat. This does not mean it is undercooked! It is the highly prized smoke ring caused by the combustion gases and the smoke. It is a sign of Amazing Ribs. Now plate, serve to your guests, and take a bow when the applause swells from the audience.

AWARD WINNING COMPETITION RIBS RECIPE

Steps:

• Prep. Remove the membrane from the slabs of ribs (read more on removing the membrane here).
• Season the ribs with Kosher salt. If you can, give the salt 1 to 2 hours to be absorbed. The process of salting in advance is called dry brining. The rule of thumb is 1/2 teaspoon of kosher salt per pound of meat, but ribs consist of only about 50% meat, so use about 1/4 teaspoon per pound. You can simply eyeball it by sprinkling on the same amount of salt you would sprinkle on the ribs if they were served to you unseasoned.
• Fire up. Prepare a smoker for indirect cooking. Alternatively, you can set up a charcoal grill for 2-zone cooking by placing a chimney full of lit charcoal briquets on one side of the grill's charcoal grate in order to create direct and indirect cooking zones. Adjust the smoker or grill vents to bring the temperature to about 225°F (107.2°C) and add two to three chunks of your favorite smoking wood to the charcoal for flavor. On a gas grill, adjust the temperature knobs so that one half of the grill is off and the other half is heated enough to maintain a temperature of approximately 225°F (107.2°C) on the indirect side.
• Once the smoker or grill is ready, brush both sides of ribs with mayonnaise and season with Meathead's Memphis Dust dry rub.
• Cook. Place the slabs of ribs meat side up on the main cooking grate as far away from the heat source as possible. Cover the smoker or grill. Allow the ribs to smoke until the meat just begins to shrink back from the ends of the bones, about 3 1/2 hours.
• Lay out two double layers of heavy-duty aluminum foil approximately eight inches longer than the ribs. Cut the stick of butter into 1/2 tablespoon pieces and top each double layer of foil with two tablespoons of butter, one tablespoon of honey drizzled over the butter, and two tablespoons brown sugar sprinkled over the top. Lay the ribs meat side down on the butter, honey and brown sugar mixture. Place another two tablespoons margarine, a tablespoon of honey, and two tablespoons brown sugar evenly on top of the bone side of each slab of ribs. Fold up the sides of the foil to create a boat, pour in the apple juice, and loosely seal the foil.
• Place the foiled ribs sealed side up on the smoker or grill and cook until the ribs shrink back from the ends of the bones by 1/4 to 1/2 inch (6.4 to 12.7 mm), about 1 hour.
• Remove the ribs from the smoker or grill and cautiously open the foil packet to allow the steam to escape. Remove the ribs from the foil and set them back on the smoker or grill meat side up. Cover the smoker or grill and allow the ribs to cook until tender but not falling off the bone, about 20 minutes. We prefer to use the "bend test." Use tongs to pick up one end of the slab of ribs, then bend them slightly. If they are ready, the slab with bow until the meat starts to crack on the surface.
• When they are ready, brush sauce on both sides of the ribs and turn them meat side up on the smoker or grill. Cover the smoker or grill and cook until the sauce sets and becomes tacky, 3 to 4 minutes.
• Serve. Remove the ribs from the smoker or grill, and slice. For competition, set 4 to 5 ribs side-by-side in the turn in box and top with another 4 to 5 ribs.

EASY COMPETITION QUALITY BABYBACK RIBS

Steps:

• Remove membrane from ribs. Wipe ribs with papertowels to remove excess moisture (helps butter to stick). rub butter onto both sides of ribs. Rub until butter doesnt slide off easily. Sprinkle (dont rub) the sweet & smoky spice onto both sides of ribs until completely and generously covered.
• Take 2 pieces of foil approximately 6in longer than the ribs and fold/crease the long edges together. Place the foil in a roasting pan or baking sheet that is large enough for the ribs to lay flat and not be pushed up on the sides. Place ribs meat side up in foil and pull up edges leaving a small opening at the top. Pour water into foil around the ribs but not on the ribs and then seal top of foil so as to leave room between the ribs and the top of the foil.(This will allow the water steam to circulate throughout the ribs making them moist and juicy.).
• Bake at 300 degrees for 3 hours Open top of foil and brush BBQ sauce onto ribs and cook 20 more minutes with foil open. Remove from oven and top with extra BBQ sauce to taste.

WORLD CHAMPIONSHIP BABY BACK RIBS

Steps:

• For the basic BBQ rub: Using a coffee grinder, grind the turbinado sugar with a few "pulses" until it is lightly powdered. Combine with the granulated sugar, salt, onion powder, granulated garlic, cayenne, black pepper, mustard, chili powder, cumin and paprika in a bowl and hand stir until well incorporated. Store in an airtight container.
• For the BBQ mother sauce: In a medium saucepan, heat the oil over medium heat. Add the onion and saute until translucent, about 5 minutes. Turn the heat to low if the onion is cooking too fast--you don't want it caramelized or browned. As the onion is getting close, add the garlic and cook until lightly golden, about 2 minutes longer. Add the ketchup, honey, tomato paste, vinegar, brown sugar, Worcestershire, dry mustard, cayenne and black pepper and stir well. Slowly add up to 1/2 cup water until the sauce reaches the consistency you like. A slightly thick consistency is best. Add about 3 tablespoons of the basic BBQ rub, stir well and taste. The sauce should have a good, well-rounded flavor. Add more of the basic BBQ rub in 1-tablespoon increments until your desired flavor is achieved, up to about 1/2 cup total. Cool and store in an airtight container in the refrigerator for up to 10 days.
• For the ribs: Rinse the ribs and remove the membrane from the back. Trim any excess fat from the tops of the slabs. Trim 1 bone from the large end of the ribs and 2 bones from the small end. This will give you a much more consistent slab for cooking.
• Starting on the backs, sprinkle the slabs of ribs with approximately 1/2 tablespoon of the basic BBQ rub each, then add 1/2 tablespoon yellow mustard each and massage into the meat. Flip the ribs over and repeat. Wrap tightly with plastic wrap and refrigerate for at least 8 hours. For a contest, I marinate ribs like this for 12 to 16 hours.
• Prepare a smoker to run at 225 degrees F with around 4 chunks of apple wood and 4 chunks of cherry wood so that the wood will smolder throughout the cooking. Remove the ribs from the refrigerator, unwrap and repeat the basic BBQ rub and mustard procedure, massaging them in. Don't get it too thick or paste-like, as this will give you a dark appearance when cooked. Place the ribs in the smoker meat-side up and cook for 2 hours. Remove the ribs from the smoker and increase the temperature to 250 degrees F. Apply the basic BBQ rub and mustard to both sides of the ribs as before. On the top sides, slather approximately 1 tablespoon of honey over the surface of each slab, then sprinkle heavily with the turbinado sugar. Lay each slab of ribs meat-side up on a piece of heavy-duty aluminum foil and fold up the edges. Pour approximately 1 to 2 ounces of the grape juice into the bottom of each foil package, then finish wrapping the ribs but don't crimp the edges--you want steam to be able to escape.
• Return the ribs to the cooker for 2 hours, then test for tenderness. (I cook ribs in this stage until they look overdone and too tender. Don't worry, they'll tighten up. If they still have too much texture, leave them in for 20 to 30 more minutes.) Remove the ribs from the cooker, open the foil and drain off the liquid. Using the foil as a tool, "roll" the ribs over so the bone side is up, glaze with the BBQ mother sauce, then roll them back over and glaze the tops. Using long tongs, carefully remove the ribs from the foil and place them back in the smoker for 15 minutes. This will let the glaze cook onto the ribs and let the ribs tighten back up. Remove from the cooker and allow to rest for 5 minutes, apply a very thin coat of sauce to "glisten" the ribs, then lightly sprinkle with chipotle powder before serving.