Beer Batter For Halibut Or Chicken Recipes

BEER-BATTERED HALIBUT WITH TARTAR SAUCE

Steps:

• For the tartar sauce: In a bowl, add the parsley, tarragon, shallot, and cornichon. Chop the hard boiled egg by removing the yolk and crumbling it, then dice the white. Add both yolk and whites to the bowl. Add vinegar, salt, mustard, mayonnaise, and a few dashes of hot sauce (or more to taste). Stir to combine and set aside.
• For the beer batter: In a large mixing bowl, mix the cake flour and baking soda with a fork. Slowly pour in the beer, stirring the entire time (it's okay if there are a few lumps). The batter should be thin, falling off the fork easily so it coats the fish, not heavy like pancake batter. Set aside.
• Fry the halibut: Fill a deep heavy-bottomed pan with oil-don't go higher than 2 inches from the rim-and heat to 350 degrees F. Season the halibut with salt on both sides. Test the oil by cooking a few drops of batter; they should float to the surface when the oil's hot enough. Remove these "tester crunchies" with a slotted spoon. One piece at a time, drop the fish into the beer batter, then remove it, letting the excess drip off. Then place it halfway into the oil, letting a crust form for 10 seconds, then releasing it gently into the pan. Repeat with two more pieces (three at a time), so the pan isn't overcrowded and cook each for 3-4 minutes. Remove the fish to a baking sheet fitted with a wire rack to drain any excess oil. Season with flaky sea salt and serve with tartar sauce and lemon wedges.

BEER BATTER HALIBUT

Steps:

• Divide halibut fillet into approximately 1.5" cubes.
• Mix dry ingredients, add beaten egg. Pour beer in until proper consistency. Batter will be smooth and a little runny but thicker than water.
• The remaining beer is yours to enjoy.
• Add oil to frying pan until oil is approximately 1/2 the height of the halibut cubes; heat on medium high until suitable for deep frying.
• Make a test piece:.
• Coat halibut piece in batter, add to oil. Fry for two minutes, then turn with tongs (being very careful of oil spattering) and fry another two minutes. Transfer finished piece to a paper towel covered plate. Split piece with fork to check for doneness, if piece does not split easily and/or middle of halibut piece does not appear to be opaque, adjust cooking time and/or oil temperature to ensure pieces are done.
• When satisfied with cooking time, repeat until all pieces have been cooked (multiple pieces can be put in pan).
• Serve warm with tartar sauce.

CRISPY BATTERED HALIBUT WITH NO BEER

Steps:

• Prep your fish by removing the skin (if any) and cutting into pieces sized about as big as a deck of cards prior to mixing your batter.
• Preheat your oil as well. Ideal frying temperature is about 365. If the oil is not hot enough you'll end up with greasy fish. If it's too hot you'll burn the batter before the fish is cooked through. The batter needs to be used immediately after it's mixed. Baking powder is temperamental and doesn't wait for cold oil!
• Combine all the dry ingredients except for the bread crumbs, and stir well to evenly distribute. Stir in the cold water and immediately dip fish in the batter, and then do a quick coat in the bread crumbs and carefully put into the preheated oil.
• Cook until golden brown and the fish is cooked through.

BEER BATTER FOR HALIBUT OR CHICKEN

Steps:

• Heat deep fryer or skillet with vegetable oil deep enough to cover meat to 375.
• Beat egg, and add remaining ingredients.
• Rinse and dry meat on paper towels in order for it to hold batter.
• Dip meat into batter and place in deep fryer or skillet.
• Cook for approx 4 minutes or until golden brown.
• Drain on paper towels.

BEER BATTER

Steps:

• In a small mixing bowl add flour, egg, garlic powder, and black pepper. Stir in 1 cup beer (you can add more than one cup to obtain your desired texture).

BEER BATTERED HALIBUT

Steps:

• Heat oil to 375 degrees
• Thaw, pat dry, and season halibut to taste with salt and pepper
• Combine flour, garlic powder, paprika, salt and pepper
• Stir egg into flour mixture
• Gradually stir beer into mixture until a thin batter has formed. You should be able to see the fish through the batter after it has been dipped
• Dip fish into batter and then place in oil. Flip once or until golden brown on both sides. Drain on wire rack or paper towel lined plate
• Serve warm with your favorite side of coleslaw or french fries

UNBELIEVABLE FISH BATTER

Steps:

• Whisk together the flour, milk, water, baking powder, and salt in a bowl until smooth.

BEER BATTERED HALIBUT

Steps:

• Whisk together the flour, salt, pepper, garlic and paprika. Whisk in just enough beer to make the consistency pourable, but not too thin. The mixture should resemble pancake batter. Set the batter and the fish pieces in separate bowls next to the stove.
• Pour the oil into a heavy bottomed saucepan and warm it over medium high heat. You want it to be as hot as possible, without smoking. When the oil is hot, drop a few pieces of fish into the batter and coat well. Shake off the excess batter and using metal tongs, gently place the fish into the oil. Hold it there for a few seconds before releasing it, so that the coating will seal and it won't stick to the other pieces or the bottom of the pan. Repeat the process, cooking just a few pieces at a time to avoid crowding.
• Let them cook for a few minutes, until the coating is lightly browned. (I found it easiest to use separate tongs for coating the fish and for frying in the oil.) Remove from the oil with clean tongs or a large wire scoop (made for frying) and drain on a plate lined with paper towels. Test a piece with a fork to make sure the center is cooked and flaking. Serve with Dill Sauce and Enjoy!